Don’t Skip these Surface Preparation Steps before Painting Your Home

More often than not, a lot of people focus on choosing the paint color to use for their homes. However, remember that a paint job should not only be about using the best paint brands and colors available. More importantly, the paint job should also last through bad and good weather in the years to come. 

Speaking of which, no one should skip surface preparation before starting a paint job. It is said that about 80 percent of botched paint jobs are due to improper surface preparation (or none of it). Whether a minor or a major painting task, you have to go through this important step. 

Why you should prep the surface first 

Before starting a paint project (whether it’s for your walls, fence, or cabinets), you need to prep them first. This involves washing or cleaning as well as repairing and sanding it. 

Surface preparation can take some time, but nonetheless essential in every painting project. Among the reasons why you should not skip surface preparation include the following: 

  • Enables the paint to adhere to the surface more easily
  • Prevents uneven painting and better distribution throughout the surface 
  • Ensures the paint job’s durability
  • Enhances the paint job’s aesthetic value 

Tips on surface preparation 

Here are essential tips on preparing the surface(s) that you are going to paint. This applies to interior and exterior wall painting tasks, cabinets, furniture, decks, and others that may require painting. 


Preparing the paint area

  • Remove home décor and furniture if needed, especially if you are going to paint the interior walls. 
  • If you are going to paint furniture or fixtures, it is better to do it outside. This is to prevent the smell of paint from lingering inside the house. 
  • Wear protective gear when doing the paint job such as safety goggles, gloves, and old clothes. 
  • Lay down old newspapers on the floor so the paint won’t stain or (in the worst cases) spill on the floor. 


Surface prepping

  • Wash the surface using a mix of laundry detergent (3 teaspoons) and water (1 gallon). 
  • If there is a presence of flaking or cracking paint, use a paint scraper to remove it. 
  • For uneven surfaces, smoothen it using sandpaper or an electric sander (if you have one). 
  • Use painter’s tape to protect the wall trims and sconces before painting the entire wall surface. 
  • For chalky or powdery surfaces, scrub the surface using a damp brush or rug. Make sure that the surface is clean enough and no chalky residue left. 
  • For mold-infested walls or other surfaces, mix bleach and water and scrub the affected area. Let it sit for an entire day before rinsing, then dry before proceeding with the paint job. 
  • Make sure to have the tools you will need to start with the painting project. This includes the primer and the paintbrushes. 
  • Start applying the primer once the abovementioned steps are all done. Let it sit for about two hours before applying the top paint. 


Surface prepping should not be a complicated task, nor something that you ignore. In fact, it is an important step before starting a paint job. That way, the paint job will come up nicely and last for long. For your home painting needs, make sure to contact only the best painting professionals near you!

2 Responses

Leave a Reply

Your email address will not be published. Required fields are marked *